PEMSERTER® Series P3®
Portable Pneumatic Hand Tool
The PEMSERTER Series P3 fastener installation tool is a portable power hand tool weighing only 10 lbs. (4.6 kg) that can develop a squeezing force of 5,000 lbs. (22.2 kN). Easily install PEM® self-clinching nuts and studs in unified or metric sizes.
| Specifications | |
|---|---|
| Fastener Range | #2-56 o #10-32 (M2 to M5) |
| Force Range | up to 5,000 lbs (22.2 kN) |
| Drive System Type | Pneumatic |
| Insertions per Hour | N/A |
| Control System | N/A |
| Auto-Feed | N/A |
| Batch Counter | N/A |
| Fastener Database | N/A |
| Insertion Graphics | N/A |
| Fastener Length Detection | N/A |
| Positive Stop | N/A |
| Screen Size | N/A |
| Robot Ready | N/A |
| Remote Connection | N/A |
| Repeatability; | N/A |
| Throat Depth | 3″ (76 mm) |
| Stroke Length | N/A |
| Up Travel % | 100% |
| Electrical Requirements | N/A |
| Air Requirements | 90 to 100 PSI (6 to 7 BAR) 1/2″ (12mm) dia. minimum line flow |
| Oil Reservoir Capacity | N/A |
| Weight | 10 lbs (4.6 kg) |
| Footprint | 16″ L x 6.2″ W x 3″ D (406mm x 158mm x 76mm) |
| Feature Talking Points | N/A |
PEMSERTER Series P3 TOOL KIT
Unified and metric kits, punches and anvils are available, providing wide-ranging versatility.
PORTABLE AND MOUNTABLE
Would you rather bench-mount? The back side of the yoke has two predrilled and tapped holes (and hardware is included) to make it easy.
