PEMSERTER® Series 4®
The PEMSERTER Series 4 is a pneumatic machine delivering 6 tons of installation force and a large 18″ (45.7 cm) throat depth. It also provides consistency, simple operation and short cycle time for increased productivity. It requires shop air only to operate.
| Specifications | |
|---|---|
| Fastener Range | #2-56 to 1/2″ (M8 stud, M12 nut) |
| Force Range | Adjustable 400 to 12,000 lbs. (1.8 to 53.4 kN) |
| Drive System Type | Pneumatic |
| Insertions per Hour | N/A |
| Control System | Pneumatic Logic |
| Auto-Feed | N/A |
| Batch Counter | Analog Stroke Counter |
| Fastener Database | N/A |
| Insertion Graphics | No |
| Fastener Length Detection | No |
| Positive Stop | N/A |
| Screen Size | N/A |
| Robot Ready | N/A |
| Remote Connection | N/A |
| Repeatability | N/A |
| Throat Depth | 18″ (450 mm) |
| Stroke Length | 2.9″ (74 mm) |
| Up Travel % | N/A |
| Electrical Requirements | N/A |
| Air Requirements | 90 to 100 PSI (6 to 7 BAR) 1/2″ (12mm) dia. minimum line flow |
| Oil Reservoir Capacity | N/A |
| Weight | 1,400 lbs (630 kg) |
| Footprint | 29″Lx26″Wx66″H (740mm x 660mm x 1676 mm) |
OPTIONAL ANVIL HOLDERS
Optional anvil holders and tooling can be easily installed to help solve problems with workpieces that prohibit the use of standard tooling.
QX4™ MANUAL TOOLING
This optional system is an efficient method to quickly change between four different anvil tools, and can be installed on new and existing PEMSERTER Series 4 machines.
