
PEMSERTER® Series P3®
Portable Pneumatic Hand Tool
The PEMSERTER Series P3 fastener installation tool is a portable power hand tool weighing only 10 lbs. (4.6 kg) that can develop a squeezing force of 5,000 lbs. (22.2 kN). Easily install PEM® self clinching nuts and studs in unified or metric sizes.
Specifications | |
---|---|
Fastener Range | #2-56 o #10-32 (M2 to M5) |
Force Range | up to 5,000 lbs (22.2 kN) |
Drive System Type | Pneumatic |
Insertions per Hour | N/A |
Control System | N/A |
Auto-Feed | N/A |
Batch Counter | N/A |
Fastener Database | N/A |
Insertion Graphics | N/A |
Fastener Length Detection | N/A |
Positive Stop | N/A |
Screen Size | N/A |
Robot Ready | N/A |
Remote Connection | N/A |
Repeatability; | N/A |
Throat Depth | 3″ (76 mm) |
Stroke Length | N/A |
Up Travel % | 100% |
Electrical Requirements | N/A |
Air Requirements | 90 to 100 PSI (6 to 7 BAR) 1/2″ (12mm) dia. minimum line flow |
Oil Reservoir Capacity | N/A |
Weight | 10 lbs (4.6 kg) |
Footprint | 16″ L x 6.2″ W x 3″ D (406mm x 158mm x 76mm) |
Feature Talking Points | N/A |

PEMSERTER Series P3 TOOL KIT
Unified and metric kits, punches and anvils are available, providing wide-ranging versatility.
PORTABLE AND MOUNTABLE
Would you rather bench-mount? The back side of the yoke has two predrilled and tapped holes (and hardware is included) to make it easy.
