824™ WindowTouch® 5e
Eliminate steps that slow you down, such as handling parts multiple times, manual feeding and missing fasteners. The 824 WindowTouch 5e delivers an easier and faster tooling setup, along with the most reliable fastener feeding and workpiece accessibility.
| Specifications | |
|---|---|
| Fastener Range | #2-56 to 1/2″ (M2 to M12) |
| Force Range | Adjustable 800 lbs to 16,000 lbs (3.6-72 kN) |
| Drive System Type | Hydraulic |
| Insertions per Hour | Up to 1,400 |
| Control System | Insertion Logic |
| Auto-Feed | Optional |
| Batch Counter | Standard |
| Fastener Database | Standard |
| Insertion Graphics | Standard |
| Fastener Length Detection | Standard |
| Positive Stop | Standard |
| Screen Size | 15″ |
| Robot Ready | N/A |
| Remote Connection | Standard |
| Repeatability; | +/- 2% of force setting |
| Throat Depth | 24″ (610 mm) |
| Stroke Length | 0 to 8.5″ (0 to 220 mm) |
| Up Travel % | 10-100% |
| Electrical Requirements | 3 Phase Low 16 A 208-240 V or High 9.6 A 380-480 V |
| Air Requirements | 90 to 100 PSI (6 to 7 BAR) 1/2″ (12mm) dia. minimum line flow |
| Oil Reservoir Capacity | 22 gallons (83 liters) |
| Weight | 3,000 lbs (1,361 kg) |
| Footprint | 64″L x 41″W x 99″H (1626 mm x 1041 mm x 2515 mm) |
MODULAR AUTOFEED SYSTEM
The MAS 350 drive system, in combination with our bowl design, provides a long list of advantages—such as tool changes reduced from 3 minutes to 3 seconds.
ALIGNMENT CHALLENGES ELIMINATED
Thanks to our T-bracket and shuttle design with integrated connectors, alignment is reduced from 2 minutes to 10 seconds.
